Junk removal
Shed Removal Cost Calculator
Prices shed removal, which is a demolition and a disposal rather than a pickup.
Result
A planning estimate, not a quote. Access, the age of the equipment, what is found once it is opened up and local labour rates all move the real figure, sometimes a long way.
Get a Free Business AuditHow the calculation works
Hours times crew times rate, plus disposal and the call-out. Removing a shed is dismantling or demolishing a small building and then hauling the result, so it is two jobs. Labour depends on construction: a timber shed comes apart reasonably quickly, a metal one is awkward and sharp, and one with a concrete base or a mortared block foundation leaves a slab that may or may not be in scope. The disposal volume is substantial because building materials are bulky, and mixed demolition waste costs more than separated streams.
What moves the number
- Construction material, since timber, metal and masonry dismantle very differently.
- Whether the base or slab is included in the scope.
- What is inside, as sheds commonly store paint, fuel, chemicals and batteries.
- Access for both the dismantling and getting the material out.
Where this one goes wrong
Sheds are where household hazardous waste accumulates, and a shed clearance frequently turns up old paint, petrol, oil, pesticides, solvents and batteries, none of which can go in a general load. Establish what is inside before quoting, because those need a separate route and sometimes a separate facility. On older sheds, roofing and siding sheets can contain asbestos, which turns a demolition into an abatement job, so a shed of any age with cement sheet roofing is worth testing rather than breaking up. Be explicit about whether the concrete base is included, since it is heavy, is priced by weight, and is a common source of disagreement.
Before you quote
- Ask what is stored inside before quoting, particularly chemicals and fuel.
- Test suspect roofing or siding sheets on older sheds for asbestos.
- State clearly whether the base or slab is in scope.
Questions
About this calculator
Does shed removal include the concrete base?
Only if stated. A slab is heavy, is disposed of by weight, and often needs breaking up, which is a meaningfully larger job than removing the shed above it. It is one of the most common misunderstandings on this work, so it belongs in the quote either way.
What about the things stored in the shed?
Sheds are where paint, fuel, oil, pesticides, solvents and batteries end up, and none of those can go in a general load. They need a household hazardous waste route. Establishing what is inside before quoting avoids either refusing part of the job or absorbing an extra trip.
Could an old shed contain asbestos?
Cement sheet roofing and siding on older sheds can, and breaking it up releases fibres. A shed of any age with corrugated cement sheet is worth testing rather than demolishing. If it is present, it becomes a licensed abatement job rather than a removal.
The formula
total = hours x people x rate + parts + call-out, then sales tax
Put this calculator on your site
Free to embed. Paste this where you want it to appear. It stays up to date automatically because it loads from BDEVY.
Please keep the attribution line. It is the only thing we ask in return.
How to use this calculator
- Hours on site (h). Enter your own figure; the page starts at 1.8 h.
- People needed. Enter your own figure; the page starts at 1.
- Labour rate charged ($). Enter your own figure; the page starts at $90.
- Parts and materials ($). Enter your own figure; the page starts at $0.
- Call-out or diagnostic fee ($). Enter your own figure; the page starts at $95.
- Sales tax (%). Leave at zero if you are quoting before tax.
The result updates as you type, so you can try a figure, see what it does to estimated total, and change it back. Nothing you enter is sent anywhere or saved.
A worked example
These are the figures the calculator opens with. Every number in the results column below is produced by the same calculation the page runs, so you can follow it through before putting your own figures in.
What goes in
| Input | Value |
|---|---|
| Hours on site | 1.8 h |
| People needed | 1 |
| Labour rate charged | $90 |
| Parts and materials | $0 |
| Call-out or diagnostic fee | $95 |
| Sales tax | 0% |
What comes out
| Result | Value |
|---|---|
| Estimated total main result | $257 |
| Labour | $162 |
| Before tax | $257 |
| Sales tax | $0 |
About $257: $162 of labour, $0 of parts and a $95 call-out.
How sensitive the answer is
Holding everything else steady and changing only labour rate charged, this is what happens to estimated total. It is worth knowing which of your inputs the answer actually hinges on, and which barely move it.
| Labour rate charged ($) | Estimated total |
|---|---|
| $45 | $176 |
| $68 | $217.40 |
| $90 example above | $257 |
| $135 | $338 |
| $180 | $419 |
Every other input is held at the example value while this one changes, which is not how a real job behaves. Treat it as a guide to which number matters most, not as five separate quotes.
What each figure means
- Hours on site (h)
- Measured in h, between 0 and 400, starting at 1.8 h.
- People needed
- A number, between 0 and 40, starting at 1.
- Labour rate charged ($)
- A money amount, starting at $90.
- Parts and materials ($)
- A money amount, starting at $0.
- Call-out or diagnostic fee ($)
- A money amount, starting at $95.
- Sales tax (%)
- Leave at zero if you are quoting before tax.
What the results tell you
| Result | What it is |
|---|---|
| Estimated total | The headline result. A money figure. |
| Labour | A money figure. |
| Before tax | A money figure. |
| Sales tax | A money figure. |
Estimating is the easy part
The jobs you never hear about cost more than the ones you mis-measure. BDEVY builds the marketing, systems and automation that bring them in.