Appliance repair
Range Repair Cost Calculator
Prices a range repair, where one appliance contains two independent systems.
Result
A planning estimate, not a quote. Access, the age of the equipment, what is found once it is opened up and local labour rates all move the real figure, sometimes a long way.
Get a Free Business AuditHow the calculation works
Hours times crew times rate, plus the part and the call-out. A range is a cooktop and an oven in one unit, often with separate failures, so diagnosis establishes which system is affected before any pricing. Dual fuel ranges add a further split, with a gas cooktop and an electric oven that fail in entirely different ways. The practical consequence is that a range with a working oven and a dead burner is a cheap repair, while the same unit with a failed control board can affect both and cost considerably more.
What moves the number
- Which system has failed, since cooktop and oven faults differ in cost.
- Whether it is gas, electric or dual fuel.
- Whether a shared control board is involved, which affects both halves.
- Whether the range is slide-in or freestanding, which affects access and replacement cost.
Where this one goes wrong
A shared control board failing can look like several unrelated faults at once, and that pattern is worth recognising: burners and oven both misbehaving, displays showing errors, or functions working intermittently usually points at one board rather than multiple components. Replacing individual parts in that situation wastes money. On economics, a range is a larger and more expensive appliance than a separate cooktop or oven, which shifts the repair-versus-replace line in favour of repairing, particularly on a slide-in unit fitted to a specific cabinet opening.
Before you quote
- Establish which system is affected before quoting.
- Suspect a shared control board where multiple functions misbehave.
- Account for the higher replacement cost of a slide-in range.
Questions
About this calculator
My range has several problems at once. What does that mean?
Usually one shared control board rather than several faults. Burners and oven misbehaving together, error codes, or functions working intermittently all point that way. Recognising the pattern avoids replacing individual parts that are not actually faulty.
Is a range worth repairing?
More often than a smaller appliance, because a range is expensive to replace and a slide-in unit has to suit a specific cabinet opening. A repair that would be uneconomic on a cheap freestanding unit can make clear sense on a built-in or higher-end range.
What is a dual fuel range?
A gas cooktop with an electric oven, chosen because gas gives responsive hob control while electric gives more even baking. For repair purposes it means the two halves fail in completely different ways, so diagnosis has to establish which system is affected.
The formula
total = hours x people x rate + parts + call-out, then sales tax
Put this calculator on your site
Free to embed. Paste this where you want it to appear. It stays up to date automatically because it loads from BDEVY.
Please keep the attribution line. It is the only thing we ask in return.
How to use this calculator
- Hours on site (h). Enter your own figure; the page starts at 1.4 h.
- People needed. Enter your own figure; the page starts at 1.
- Labour rate charged ($). Enter your own figure; the page starts at $115.
- Parts and materials ($). Enter your own figure; the page starts at $85.
- Call-out or diagnostic fee ($). Enter your own figure; the page starts at $95.
- Sales tax (%). Leave at zero if you are quoting before tax.
The result updates as you type, so you can try a figure, see what it does to estimated total, and change it back. Nothing you enter is sent anywhere or saved.
A worked example
These are the figures the calculator opens with. Every number in the results column below is produced by the same calculation the page runs, so you can follow it through before putting your own figures in.
What goes in
| Input | Value |
|---|---|
| Hours on site | 1.4 h |
| People needed | 1 |
| Labour rate charged | $115 |
| Parts and materials | $85 |
| Call-out or diagnostic fee | $95 |
| Sales tax | 0% |
What comes out
| Result | Value |
|---|---|
| Estimated total main result | $341 |
| Labour | $161 |
| Before tax | $341 |
| Sales tax | $0 |
About $341: $161 of labour, $85 of parts and a $95 call-out.
How sensitive the answer is
Holding everything else steady and changing only labour rate charged, this is what happens to estimated total. It is worth knowing which of your inputs the answer actually hinges on, and which barely move it.
| Labour rate charged ($) | Estimated total |
|---|---|
| $58 | $261.20 |
| $86 | $300.40 |
| $115 example above | $341 |
| $173 | $422.20 |
| $230 | $502 |
Every other input is held at the example value while this one changes, which is not how a real job behaves. Treat it as a guide to which number matters most, not as five separate quotes.
What each figure means
- Hours on site (h)
- Measured in h, between 0 and 400, starting at 1.4 h.
- People needed
- A number, between 0 and 40, starting at 1.
- Labour rate charged ($)
- A money amount, starting at $115.
- Parts and materials ($)
- A money amount, starting at $85.
- Call-out or diagnostic fee ($)
- A money amount, starting at $95.
- Sales tax (%)
- Leave at zero if you are quoting before tax.
What the results tell you
| Result | What it is |
|---|---|
| Estimated total | The headline result. A money figure. |
| Labour | A money figure. |
| Before tax | A money figure. |
| Sales tax | A money figure. |
Estimating is the easy part
The jobs you never hear about cost more than the ones you mis-measure. BDEVY builds the marketing, systems and automation that bring them in.