Auto repair & detailing
Paint Correction Cost Calculator
Cost paint correction from defect severity, paint hardness and how many stages the finish actually needs.
Result
A planning estimate, not a quote. Access, the age of the equipment, what is found once it is opened up and local labour rates all move the real figure, sometimes a long way.
Get a Free Business AuditWhat moves the number
- Number of stages. A single-stage polish and a multi-stage correction are different jobs entirely.
- Paint hardness, which varies by manufacturer and changes how long each panel takes.
- Paint depth, which limits how much correction is safe on a given panel.
Where this one goes wrong
Correcting without measuring paint depth, particularly on a vehicle that may have been repainted. Removing too much clear coat cannot be undone, and a repainted panel can have far less to work with than the factory finish.
Before you quote
- Paint depth readings across panels, not just one.
- Whether any panel has been repainted or filled.
- A test section agreed with the customer before committing to the whole vehicle.
Questions
About this calculator
How many stages does a vehicle need?
Whatever a test section shows, which is why a test section is done first. Quoting a stage count before testing is guessing at the hours the job will take.
Why does paint hardness matter?
Because it changes how long each panel takes and which compounds and pads work. The same defect on a hard paint and a soft paint are very different amounts of labour.
Can every defect be removed?
No, and saying so before starting is essential. Defects deeper than the safe correction limit cannot be polished out, and the customer needs to know that before the work rather than at handover.
The formula
total = hours x people x rate + parts + call-out, then sales tax
Put this calculator on your site
Free to embed. Paste this where you want it to appear. It stays up to date automatically because it loads from BDEVY.
Please keep the attribution line. It is the only thing we ask in return.
How to use this calculator
- Hours on site (h). Enter your own figure; the page starts at 2.2 h.
- People needed. Enter your own figure; the page starts at 1.
- Labour rate charged ($). Enter your own figure; the page starts at $135.
- Parts and materials ($). Enter your own figure; the page starts at $180.
- Call-out or diagnostic fee ($). Enter your own figure; the page starts at $95.
- Sales tax (%). Leave at zero if you are quoting before tax.
The result updates as you type, so you can try a figure, see what it does to estimated total, and change it back. Nothing you enter is sent anywhere or saved.
A worked example
These are the figures the calculator opens with. Every number in the results column below is produced by the same calculation the page runs, so you can follow it through before putting your own figures in.
What goes in
| Input | Value |
|---|---|
| Hours on site | 2.2 h |
| People needed | 1 |
| Labour rate charged | $135 |
| Parts and materials | $180 |
| Call-out or diagnostic fee | $95 |
| Sales tax | 0% |
What comes out
| Result | Value |
|---|---|
| Estimated total main result | $572 |
| Labour | $297 |
| Before tax | $572 |
| Sales tax | $0 |
About $572: $297 of labour, $180 of parts and a $95 call-out.
How sensitive the answer is
Holding everything else steady and changing only labour rate charged, this is what happens to estimated total. It is worth knowing which of your inputs the answer actually hinges on, and which barely move it.
| Labour rate charged ($) | Estimated total |
|---|---|
| $68 | $424.60 |
| $101 | $497.20 |
| $135 example above | $572 |
| $203 | $721.60 |
| $270 | $869 |
Every other input is held at the example value while this one changes, which is not how a real job behaves. Treat it as a guide to which number matters most, not as five separate quotes.
What each figure means
- Hours on site (h)
- Measured in h, between 0 and 400, starting at 2.2 h.
- People needed
- A number, between 0 and 40, starting at 1.
- Labour rate charged ($)
- A money amount, starting at $135.
- Parts and materials ($)
- A money amount, starting at $180.
- Call-out or diagnostic fee ($)
- A money amount, starting at $95.
- Sales tax (%)
- Leave at zero if you are quoting before tax.
What the results tell you
| Result | What it is |
|---|---|
| Estimated total | The headline result. A money figure. |
| Labour | A money figure. |
| Before tax | A money figure. |
| Sales tax | A money figure. |
Estimating is the easy part
The jobs you never hear about cost more than the ones you mis-measure. BDEVY builds the marketing, systems and automation that bring them in.